SPECTROMETER
One OBLF direct reading vacuum Spectrometer for regular checking of iron analysis. We are determining the quantities of 16 elements in the measuring materials..
Destructive Testing
CUTTING MACHINE
The cutting operation is the first step to prepare the sample for the Metallographic examining. This device is used to reduce or change the dimensions of the sample piece.
HARDNESS TESTER
This device is used to measure the hardness of the casting parts. It is also suitable for the testing of the various metals.
GRINDING AND POLISHING MACHINE
This equipment is used to smooth the cutted surface. The different sized Grinding discs are used. Also, this device is used to reduce the surface roughness. The specimen surface must first be ground and polished to a smooth and mirror like finish.
METALLOGRAPHY MICROSCOPY
The Metallography microscopy is used to study on the microstructure of the materials. We can examine and determine the characteristics of the sample.
Non-destructive Testing
ULTRASONIC INSPECTION
Ultrasonic Inspection Method is used to detect the defects (not visible cracks, discontinuities, etc.) in the internal structure of metallic materials by means of the ultrasonic waves.
.
Sand Tests
SIEVE ANALYSIS
The Sieves are used to determine the size and distribution of the moulding sand and the other materials. The system work as a vibrating and oscillating. The materials collect on the sieves accordig to their sizes from top to the bottom.The top screen has large number.
SAND TESTS
This equipment calculates the humidity rate, active clay content and total clay content in the moulding sand.
Paint Thickness
Paint Measurement
Paint Thickness Measurement
.
Mechanical test such as tensile and impact tests and some non-destructive test are carried out in KOSGEB laboratories